29 июля 2015 года в29.07.2015 08:38 3 0 10 1

Application Of Refractories In Different Parts Of Glass Furnaces

Refractories are the main building materials for glass furnaces. It has a decisive impact on the quality of glass, energy consumption and the cost. The development of glass melting technology mainly depends on the development and quality of refractories.

Sidewall and bottom of melter predominately consist of fused cast AZS block, whereas sintered zirconia mullite brick in some cases can be applied to bottom area, where the application condition is not that demanding. Beneath the fused cast AZS lie the chamotte block at the very bottom, in between AZS ramming mix is filled. In corner area fused cast AZS with Void Free Casting is used exclusively. Fused cast AZS is so far the primary refractory brick for glass furnace.

In tin bath, alumina forming brick such as sillimanite and bottom block are used typically.

Silica brick is used also quite frequently in glass furnace. It finds its application for melter crown, front wall, breast wall and gable as well. It is the traditional choice for the crown.

α-β Fused cast alumina block is used extensively for breast wall, as well as sidewall and bottom of cooling zone. Fused cast α-βalumina block and Fused cast βalumina block are also used in the crown and superstructure.

Direct-bonded magnesia chrome brick is most suitable for upper checker, where strong alkali corrosion exist, or lower and middle checker, where sodium sulfate condenses. There are several substitute brick of chrome magnesia for checker chamber, among them are magnesia zirconia brick, magnesia forsterite brick and magnesia alumina brick. While the first two have similar thermal properties and usage as magnesia chrome brick, magnesia alumina brick is usually used for the middle checker of small regenerator. Light weight magnesia forsterite brick is used for the insulation layer of checker chamber. Sillimanite brick can be used also for checker in low temperature area (below 800°C). In principle the refractory material used for wall is in line with that of checker brick at the same height.

Sunrise is a refractory material supplier from China. The main products of Sunrise include fused cast AZS block, fused cast alumina block, mullite brick, zircon brick, alumina bubble brick, sillimanite brick, corundum brick, low porosity fireclay brick, high alumina brick, all kinds of glass furnace ramming masses, etc..

Комментарии

Зарегистрируйтесь или войдите, чтобы добавить комментарий

Новые заметки пользователя

REFRACTORY — Это просто Вьюи блог

13

How To Judge The Quality Of Fire Clay Brick

Fire clay brick accounts for an important position in the refractory industry. The most important feature of fire clay brick is that the ...

13

How to select fused cast AZS block

Recently, with the development of furnace technology, more and more fused cast AZS block is used in the glass furnace. So, how to select ...

12

The size and specification requirements for hot stov...

Hot stove fire clay brick is made of refractory clay as the raw material. It is used in the hot stove, regenerator and partition walls. I...

13

The Use Of Silica Brick In The Glass Furnace

Since the silica brick has low price, high purity, high softening temperature under load, no pollution to glass liquid and good resistanc...

12

The Checker Work of Glass Furnaces

The checker work of glass furnaces is subjected to more serious corrosion than the crown and sidewall since all checker bricks are subjec...

11

Applications of fire clay bricks

Fire clay brick plays a versatile role in the many industries. Fire clay brick can be used in the metallurgical industry. Fire clay ma...