LED stage lighting now is widely used in many theater, music shows and some other kinds of parties, for it can create best dj lighting effects to the live scene, maximized people's party experience. So, there is no doubt, a good preparation of the stage lighting is so important. Led stage lighting is often connected and controlled by the digital multiplex communications protocol, that is the DMX, this system can allow up to 512 individual channels to be connected and operated with DMX three-conductor cable.All in all, to make a nice led stage lighting connecting, the DMX channel is vital.
First of all, moving the No.1 dimmer or power pack DIP switch to the "on" position, set the DMX binary address for four channel operation. Set the address to 001 for packs with digital controls. And then, plug the stage lighting fixtures into the AC outlets on the pack and make every lights into one of the four channels. You may plug additional lighting fixtures into a single channels if the pack have more than one outlet per channel.
Moreover, remember to plug the DMX cable into the input of the pack, through the output jack of the first unit the additional packs may be daisy-chained. insert the cable from the pack into the output jack of the DMX controller. Turn on dimmer or power pack and DMX controller power switches. Turn on the led lighting fixtures power switch if it is needed.
Good design and decoration of the on stage lighting, will have a good impact on the performance. Topled stage lighting as a professional stage lighting manufacturer, here can give you good quality service of LED stage lighting. Contact us freely if you are in demand for it.
- See more at: https://www.topledlighting.com/ways-to-build-led-stage-lighting.html