The power cable is the most important equipment for every people’s daily life. For each cable manufacturer, they should face with many problems such as faults and repairing about this kind of equipment. However, the common faults for the cable is leaking, ground, short circuit and internal disconnection failure. For these failures, people should take strong measures to enable the timely handling of defects or at least let these faults does not worsen. Today, the most famous online seller would tell people these factors.
The first point is about the causes and treatment of oil spill. This problem is very commonly for the cable fault. However, the cable manufacturer has told people that the overloading for the cable would cause the oil spills. The overload operation of cable would let the temperature inner rose so quickly. In that case, the pressure of a lot of oil inside the cable would be leak. If the quality of the cable is better enough, the cable oil will break the seal from the cable end and oozed.
Because of this situation, people such as cable manufacturer should first monitor whether solar panel manufacturer the cable is overload in the working process. Under normal circumstances, the cable is strictly prohibited the overload operation. The cable manufacturer which website is https://www.fenjiangcable.com/ has said that the power cable which has had the oil spill phenomenon should be eliminated defects which have led to oil spills.
The height difference of the cable head end would cause the phenomenon of oil leakage. However, this kind of situation is mainly due to the ill-considered cable laying. On the other hand, the special environmental conditions would also the main reason for this kind of situation. In order to properly resolve this problem, people should apply the specify method depending on the specific circumstances and conditions. In general, people should first consider the sealing situation of two ends of the power cable. If this step has been taken carefully, people could effective stop the phenomenon of oil spill.
The other kind of situation which could cause the oil leak of the cable is that insulation wrap of cable Joints or terminal rg59 with power cable head is not tight. The badly sealing of the cable end could also the big problem which the engineer should take in to consideration. So, in the production process, people should pay more attention to these parts in the power cable. If people want to purchase the high quality power electric cable, Fenjiang Cable would be the best choice for them.